How does the Power Efficiency Guide work?

Is the Power Efficiency Guide real or a scam? - by Quora

Power Efficiency Guide Review by Quora: 

Someone just handed me a link to the Power Efficiency Guide.

The other REAL answers to this question (not the stupid “yeah its great” answers with affiliate links) mention science as the reason it can’t be legit (which is all well and good).

Much more persuasive is the ECONOMIC answer. Mark Edward (or whoever the bullshit author behind this is) didn’t invent anything except a BOOK on something that, if it were real, would be totally disruptive in a Thomas Edison kind of way. If he really wanted to change the energy markets he would open a manufacturing company and sell these devices for $1000 to any buyer giving himself huge margins and everyone else a perpetual source of energy that would pay for itself in the first couple of months of usage.

Hell, if Mr. Edwards is really that concerned, he could just open source the plans and put it on the internet for free and become know universally and historically as the man who solved the energy problem and he would probably get a Nobel prize and could do speaking engagement at 250,000 a pop and still make millions all while being regarded as a saint right there next to Mother Theresa.

People, just think about. NO… IT IS NOT REAL.

It is way easier to make money by conning naive people into buying a book than building something disruptive that changes everything.

Actually, no, I take that back. It is SO REAL. Please click here on my affiliate link so I can make a few bucks, too.

Or even better. Click here to get my teleportation system for $99.95 which you can build with a flyswatter and chewing gum. Never fly an airplane again.

Source: https://www.quora.com/Is-the-Power-Efficiency-Guide-real-or-a-scam

Reviews number 2, 3, ... are all promoted by the people promoting  Power Efficiency Guide products. Of course, they said  Power Efficiency Guide is good. I will not repeat those assessments.

Power Efficiency Guide real or a scam

 Power Efficiency Guide is not a Scam!

The argument of the person who answers the question "Is the Power Efficiency Guide real or a scam?" is very logical. But it is incomplete, and even, the answer is a lie.

The overview of Power Efficiency Guide: More than 100 years ago, from the time of Nikola Tesla, free Ether science and energy were suppressed by the electricity industry. Therefore, to this day, there is still a struggle between righteous scientists and "monopoly of electric power".

There are 5 forces around this war:

1. Monopoly electric power
2. Kind scientists
3. Unkind scientists
4. People believe in free energy
5. People don't trust electricity for free

The person who answered that question on Quora, not to mention the context of the war and the conspiracy theories.

Free energy generators will not be able to stand up in the political context and Power monopoly today.
So they retail the blueprints. They are scientists.
But why don't they sell for $ 1,000?
Please answer: they sold for a price higher than $ 1,000, but it's a much better design than  Power Efficiency Guide.

Here is some evidence for my argument:

Kind scientists: A Practical Guide to Free-Energy Devices
Unkind scientists and monopoly of electrical energy: Occult Ether Physics - Electropuls
People believe in free energy: Nikola Tesla: The Zero-Point Energy Field and How to Exploit it
Conspiracy theory: Earth Engine Review: Half-truth for Free Generator

Conspiracy theory: Some companies are led by the electricity industry, they have created projects about magnetic generators (using the force of a permanent magnet). They create reputation. Then, in a way, they "proclaimed" themselves to be a scam.

Kind scientists - A Tesla fan scientist has developed a free energy generator program:

In addition to selling manuals, he probably sold a lot of contracts to power users who dug Bitcion.

If it wasn't for the good scientists who sold the blueprints, then there was some force fighting the electric industry.

Do you think Power Monopoly has no enemies? If you look back at history, with an understanding of Nikola Tesla, you will see that it is possible that Power Monopoly is your enemy.
Of course, there are many other enemies. This issue is related to politics, capacity, finance, etc.

Bottom line:  Power Efficiency Guide is not the best design for harnessing energy from Ether, but it is also enough to be a weapon for the battle with the electricity industry.

The principle of electricity production of Power Efficiency Guide

You can find reviews about Power Efficiency Guide on search engines. All reviews for Power Efficiency Guide evade the following:

• Ether
• Zero-Point Energy 
• Radiant Energy
• Magnetic generator
• Self-sustaining generator - or a self-powered generator

The seller of the blueprint does not mention it, because, if the above terms are mentioned, it is very difficult for them to sell.

All of these scientific techniques, one time it was suppressed, that was the era of Tesla. See details here: Exploring the Nature of the Ether . And, currently controversial.

Those things, they didn't dare mention it, but it was the truth.

Power Efficiency Guide operates based on zero point energy extraction.
The exploitation of zero point energy in Ether has many ways. If you've read the article that I mentioned above (The Zero-Point Energy Field and How to Exploit it), you can see there are 4 ways to exploit zero point energy from Ether:

1. Free energy generator by extracting Zero-Point Energy from The Air (Ether)
2. Free energy generator by extracting Zero-Point Energy from the negative charge of the earth (Ether)
3. Free energy generator by harnessing Zero-Point Energy from permanent magnets (Ether)
4. Free energy generator by extracting Zero-Point Energy from the negative charge of the earth and positive charge from outside the atmosphere - providing free electricity to all mankind (The program has been banned by the "elite") - Ether

Power Efficiency Guide work

The design Power Efficiency Guide belongs to category 3, which means harnessing energy from Ether using a permanent magnet - magnetic motor. In addition, Power Efficiency Guide operates as a self-powered generator.

Why do I know this? Because there was a buyer Power Efficiency Guide, and here is the book's table of contents:

Download: Power Efficiency Guide


Introduce a blueprint similar to Power Efficiency Guide

A free-energy developer working in South Africa where it is difficult to find electronic components, has very kindly shared the details of his compact self-powered generator so that you can build one if you choose to do so. Using a small inverter, the output of the prototype is 40 watts at mains voltage and frequency and the generator is a small table-top unit which is not difficult to build. The generator uses five small 12-volt 7 Amp-Hour lead-acid batteries like this:

While this sounds like a lot of batteries, bear in mind that this is a generator which has a continuous electrical output, day and night and the batteries never have to be charged – a bit like a solar panel which works at night as well as during the day. Even if you are not familiar with electronics circuit diagrams (chapter 12 can fix that for you if you want), please try to follow along as we run through the circuit diagram and explain how the generator works. This is the circuit diagram:

The battery marked “A” powers the circuit. A rotor “C”, containing five magnets is moved so that one of the magnets passes near the coils. The coils set “B” has three specially-wound coils and the magnet moving past those three coils generates a small current in coil number “1” which then flows through the resistor “R” and into the base of the transistor, causing it to switch on. The power flowing through the transistor coil “2” causes it to become a magnet and that pushes the rotor disc “C” on its way, keeping the rotor spinning. It also induces a current in the winding “3” and that current is rectified by the blue diodes and passed back to charge battery “A”, replacing the current drawn from that battery.

When the magnet in rotor “C” passes away from the coils, the transistor switches off, moving its collector voltage very quickly up to the +12 Volt line, starving coil “2” of current. Because of the way that coils are, the coil drags the collector voltage on up and it would reach 200 volts or more if it were not connected through the red diode to all five batteries which are connected in one long chain. The batteries will have a combined voltage of just over 60 volts (which is why a powerful, fast-switching, high-voltage T13009 transistor is being used. As the collector voltage passes the voltage of the battery chain the red diode starts conducting, passing the available energy in the coil into the battery chain. That current pulse passes through all five batteries, charging all of them. The higher voltage caused by so many batteries means that higher power is fed into all the batteries from coil “2”. Loosely speaking, that is the generator design.

In the prototype, the load for long-term testing was a twelve volt 150-watt inverter powering a 40-watt mains light bulb:

The basic design shown above was then modified by the addition of two additional pick-up coils:

This winding now contains coils 1,2 and 3 of the circuit diagram. There is no need to concern yourself with marking the ends of each strand of wire as a simple ohmmeter will tell you which two ends have a winding between them.

Coil 1 is used as the trigger coil which switches the transistor on at the right instant. Coil 2 is the drive coil which is powered by the transistor, and Coil 3 is the first of the output coils:

Because of the coils which were already to hand during the development of this highly successful system, coils 4 and 5 are simple helical-wound coils which are wired in parallel with drive coil 2. They boost the drive and they are necessary. Coil 4 has a DC resistance of 19 ohms and coil 5 a resistance of 13 ohms. However, investigation is underway at present to determine the best coil combination for this generator and it is probable that the additional coils will be the same as the first coil, coil “B” and that all three coils are connected in the same way and the driving winding in each coil driven by the one powerful, fast transistor. The present arrangement looks like this:

The two gantries can be ignored as they were only for investigating alternative ways of triggering the transistor and they are no longer used.

At this time, coils 6 and 7 (22 ohms each) are extra output coils connected in parallel with output coil 3 which is 3 strands each with 4.2 ohm resistance. They can be air-core or have a solid iron core. Testing indicates that the air-core version works slightly better than having an iron core. These two coils are wound on 22 mm diameter spools and each has 4000 turns of 0.7 mm (AWG # 21 or swg 22) enamel or shellac insulated solid copper wire. All of the coils are wound with this size of wire.

With this coil arrangement, the prototype has run continuously for three weeks, maintaining the drive battery at 12.7 volts all the time. At the end of the three weeks, the system was stopped so that it could be altered and tested with a new configuration. In the configuration shown above, the current flowing from the driving battery into the circuit is 70 milliamps, which at 12.7 volts is an input power of 0.89 watts. The output power is either 40 watts or close to it, which is a COP of 45, not counting the fact that three additional 12V batteries are being charged at the same time. That is very impressive performance for the circuit.

In a nutshell: with the small design just introduced, combined with a brief summary of the content of  Power Efficiency Guide, we have learned how  Power Efficiency Guide uses electricity. And it is also the answer for How does the Power Efficiency Guide work?

Some generator homemade plans are similar to Power Efficiency Guide

Download: Power Efficiency Guide

As I said, Power Efficiency Guide is not a blueprint worth more than $ 1,000.

There are 4 ways to extract electricity from Ether. Using the force of a permanent magnet to create permanent rotation is just one way.

Generator homemade plans are similar to Power Efficiency Guide: 

• Infinity Sav - Self-sustaining Magnetic Generator
• Ultimate Energizer

The design is different from Power Efficiency Guide

Another way of harnessing zero energy is to harness Radiant Energy

In this way, you won't need permanent magnets, nor will you have a rotating motor. all just silence in mechanics. But it generates electricity. Explain why, you can review it here: The Zero-Point Energy Field and How to Exploit it

Here are two guides to extracting energy from Ether (other than  Power Efficiency Guide):

1. Overunity Generator
2. Freedom Particle System

Overunity Generator is suitable for people on the ground and in the countryside. You can harness electricity from the ground.

Freedom Particle System is for people who live in tall buildings. You can exploit electricity in a high-rise residential area with this design.

Design number 3: Ultimate Energizer

Ultimate Energizer  - This is a design consisting of two parts:

1. Magnetic motor
2. The High-power Motionless Generator 

Which should you choose?

To my knowledge, you should choose Ultimate Energizer. Because it includes  Power Efficiency Guide, Overunity Generator , and Freedom Particle System in it.